HOME LOGIC LIVINGYour inspiration
- Protective Coatings
- Driveways & Resin Surfacing
- Windows, Doors & Conservatories
- Boilers & Smart Home Products
- Flat Roof & Conservatory Roofs
- Spray Foam Insulation
- Online EstimatorBEST Offers TODAY!
- HOMEWORLD Shop OnlineGet In TouchGo backPRODUCTS PAGE
Do It Yourself Spray Foam vs Professional InstallationBy admin
Tuesday, 3 September 2019
There are numerous reasons why you should consider upgrading your home’s insulation. To start with, it will make your home a much more comfortable and cosier place to live in.
If you are thinking of insulating your home, spray foam insulation is well worth considering. But, you have to decide whether to install it yourself, or enlist the services of an experienced professional to ensure the success of this venture from the outset.
Since the decision is not as easy as it may initially seem, here is a list of pros and cons for both do it yourself spray foam insulation and professional spray foam installation to help you reach a final decision…
Do it yourself spray foam Insulation: The Pros:
Accommodates Smaller Spaces:
DIY spray foam insulation is a good option for small areas around windows and doors.
Cuts Initial Outlay Considerably:
You can avoid having to pay a contractor’s fee, by insulating the smaller areas of your home yourself.
Do it yourself spray foam Kits Are Available:
do it yourself spray foam kits are readily available, and you can even purchase them from your local home improvement store. Just take the time to go through the instructions on the kit.
Do it yourself spray foam Insulation: The Cons:
The Product Does Not Mix Properly:
The problem with D.I.Y spray foam insulation is not the application, but even before it leaves the gun. In case the canisters have not been hooked up properly, the mixture inside the tank could be ruined, leading to more additional expenses.
The Nozzle Gets Clogged:
Even a pause of about 30 seconds clogs up the nozzle, and you need to swap out the nozzle in under 30 seconds so that it does not run the mixture inside the tank. This means that you have to be super quick, and if not, your D.I.Y spray foam insulation can incur a lot of extra expenditure.
The Foam Is Very Sticky:
You have to be very careful regarding where you are spraying the foam, because the foam can be extremely sticky. In case you have sprayed in unwanted places, it is going to be extremely difficult to remove it.
Professional Spray Foam Installation: The Pros
Insulation Projects Of Any Size Can Be Handled:
Professionals are able to carry out jobs of all sizes. From challenging and convoluted spaces, to outbuildings that need extra protection, they are capable of handling it all.
Far Less Time Consuming:
By hiring a contractor, you will be able to drastically reduce the time taken to insulate your home. Moreover, with professionals around, you won’t have to worry about the repercussions of a botched attempt.
Solid Knowledge Of Building Codes:
Insulation contractors have the requisite knowledge about the latest energy efficiency codes, current building codes and rebates. They will insulate your home, making sure that they are fully compliant with the latest regulations. Moreover, they will also look for mildew, mould, structural issues, and signs of potential pest infestation.
Professionals Are Licensed And Insured:
A good spray foam installation professional is going to have a license and insurance. So, if anything were to happen during the installation, they will take care of it, and you will not have to take care of the extra costs yourself.
Professional Spray Foam Installation: The Cons:
Hiring a professional is expensive:
Enlisting the services of an expert costs more than opting to install spray foam insulation yourself.
Challenging To Check Credentials:
Finding a good contractor is a daunting task, and even after you have found a licensed company, it can be difficult to ascertain whether they are really as reputable as they claim. Independent review sites, such as Trustpilot, offer a good indication of the service your chosen contractor provides.
D.I.Y vs Professional Installation: Final Verdict
If you compare the pros and cons of both DIY spray foam insulation and professional spray foam installation as given above, it makes a lot of sense to hire an insulation contractor to handle the job on your behalf.
The contractor will be able to finish the job faster, and without wasting or needing more resources to complete it.
Also, even though an experienced contractor costs more than tackling the task yourself, their years of training and ability to finish the work at the very first attempt makes it more than worth the expense.
Make sure to only work with contractors who are licensed and insured so that you can enjoy complete peace of mind.
Do you need to insulate your home or update the existing insulation? Take the first step to creating cosier conditions today, by calling 0800 1700 636 now!
Related Home Logic Living Articles
- Is Spray Foam Insulation Toxic or Safe?
- Alternatives To Rockwool Insulation: What Are My Options?
- Seeking Spray Foam Quotes On Behalf Of Parents? Here's What To Do...
- Conservatory Roof Leaking Where It Joins The House? Do This…
- How to Make a Conservatory into a Room
- Damp and Mould on Walls: The Definitive Guide
- How Effective Is Solar Glass Over Polycarbonate?
- How To Make The Most Of A Glass Roofed Conservatory