Revolutionary new thermodynamic domestic hot water system

The Home Logic Series is a new revolutionary thermodynamic domestic hot water system dedicated to producing efficient hot water in it’s own storage tank and simultaneously heating the existing water cylinder in the home.

The exclusive static condensation process in the Home Logic Series is unique, offering lower running costs and resolves issue’s being experienced with other thermodynamic systems such as air intake and space for installation.

The Technology

The Home Logic Series is pre-installed with an ecological fluid (R134a), which passes through an aluminium panel at minus temperatures.

This allows the unit to collect natural energy sources, from the wind, sun, rain – night or day. Ecological fluid collects heat from the air via natural convection, which is then compressed to increase temperature – passed directly into your water storage unit. The fluid is then passed through an expansion valve and back to the panel as the process repeats itself. That means perpetual function 365 days a year.

home logic series

What is Thermodynamics?

Our thermodynamic hot water system collects energy from a range of energy sources such as the wind, rain and the sun throughout the whole day.

The cooling liquid goes into the atmospheric energy collection panel which absorbs the ambience of sun, rain, wind, environment temperature and other climate factors.

The water is heated by the thermodynamic cycle condenser which transfers the collected energy to the water heating it in the process.

During the water heating process, the compressor increases the temperature of the water up to 55°C before it is transferred to an exchanger. Once the process has been completed, the liquid cools down, and the circuit is repeated.

The technology used in thermodynamics outperforms similar technologies such as heat pumps and solar collectors.

table

Benefits

  • Operates in sun, wind rain and at night
  • Heats water to 55°C all year
  • Superb thermal efficiency
  • Suitable for domestic and commercial properties
  • Aluminium panels only weigh 6.2kg
  • Installation is straightforward
  • Very little maintenance required
  • Wall mounted (doesn’t have to face south)
  • Reduces carbon emissions significantly
  • Cost effective

MAIN ADVANTAGES TO YOU

  • Flexible instillilation via compact unit
  • Uses ecological fluid R134a
  • Isolating injected polyurethane 40kg/m3
  • Increase in stored DWH water volume
  • Higher performance / efficiency with lower noise
  • Low heat recovery time
  • Aluminium Condenser
  • No expensive water pump or heat exchanger
  • Electrical resistance back up
  • Can be retro fits to existing cylinder

HOW DOES IT WORK?

Discover what the Home Logic Series can do for your home

After a short period of time the Home Logic Series will reach the set point of 55ºC giving the system 75/110ltr of DHW ready to be used.

When the Home Logic Series is at temperature, it will transfer the energy from the store to the existing cylinder ensuring that there will always be a minimum temperature of 45 ºC in the existing cylinder.

The previous heating cycle is repeated several times transferring the energy from the Home Logic Series to the existing cylinder until the set points of 55ºC in the Home Logic Series and 50ºC in the existing cylinder are reached.