Go back
Protective Coatings

How Long Does Properla Paint Take to Dry?

how long does properla paint take to dry

The question of how long does Properla paint take to dry is an interesting one for people who’ve heard about this amazing option for building structures. In most climates, it only requires around half an hour of drying time before the paint is dry to the touch.

The good news with Properla is that while people may focus on the drying time, there’s so many other benefits to the product line that it’s quickly forgotten in favour of its best use.

So without further ado, let’s look at a few of the different ways that this range of insulating products can be used.

Masonry Crème for Brickwork Insulation

Treating brickwork with the Properla insulation creme product penetrates up to 17 mm inside the walls. Once applied and left to sit, the wall is protected from rising damp for up to two decades.

The product has been tested for EN ISO 15148:2002 and works equally well on sandstone, concrete, brick or mortar. This makes it ideal for buildings that have already been erected, as well as new ones under construction.

For homes in wetter climates, just a 5-percentage dampness penetration to walls lessens their insulating ability by roughly 50%.

By comparison, adding the masonry creme to brickwork creates a water-repellent, breathable surface where rainfall rolls over brickwork, rather than seeping into it.

Buildings breathe naturally and with better heat retention, energy bills are appreciably lowered in colder seasons too.

How Long Does Properla Paint Take to Dry?

When you ask how long does Properla paint take to dry, which is a question often asked when people don’t believe its impressive properties, the answer is – it depends.

Apologies to be vague, but it’s true! On cold days where temperatures haven’t yet reached 20° centigrade, the exterior façade coating product will be dry to the touch in around half an hour.

However, when temperatures drop lower, like say just 10-degrees lower, then the drying time is extended considerably; up to four hours on average.

It’s worth pointing out that a second coat must be applied of this exterior façade coating because it needs two layers to provide its amazing properties fully. The second coat goes on, and this too needs time to dry as well.

Therefore, it’s important to apply any Properla products in good weather conditions, or it’ll take two visits at different times to complete the project.

how long does properla paint take to dry

After you’ve dealt with the question of how long does Properla paint take to dry, other important matters (like what type of finish on brickwork results after application) pop into your head

Which Side of a Home Benefits the Most?

When thinking about which side of the house or office building to apply the paint first, the consideration about how long does Properla paint take to dry becomes less of an issue.

The focus is which walls will benefit from an early application to gain the waterproofing or insulating properties sooner?

For homes that are near the coast, and experience a high moisture level due to the sea salt ever present in the moist air, the walls facing the sea certainly qualify. The north side of any building does deal with varied weather elements a lot, and would be a good choice in this case.

Alternatively, the parts of the property that get the most sun or rainfall are likely candidates too. Take your pick!

What Finish Are You Interested In?

After you’ve dealt with the question of how long does Properla paint take to dry, other important matters (like what type of finish on brickwork results after application) pop into your head.

For the façade coating which uses colours, the result is a matt finish effect. However, with both the water repellent and masonry crème products, they dry with a natural look that doesn’t alter the original finish one bit.

If it was matte or shiny, or a natural look before, it’ll remain the same after the two applications.

how long does properla paint take to dry

Whether you are working on a new construction, are a property manager for a company, or simply a homeowner looking to protect your home from the UK’s drizzly downpours – using a Properla protective product offers many benefits!

Does the Protection Begin Immediately?

Once applying one of the products on a wall that’s already dry, and with the two coats (where applicable) having been applied properly with the time gap in between, then the activation time is quick.

For both the Properla Water Repellent and Masonry Crème products, the protection and water beading effects become evident after just a couple of hours.

With the exterior façade coating, this can be surprisingly fast as well. But in consistently cold weather, it could be a three week wait to see the beading with droplets of water showing up. The local temperature changes both the drying time and activation period alike.

Using a Product with Many Benefits

Whether you are working on a new construction, are a property manager for a company, or simply a homeowner looking to protect your home from the UK’s drizzly downpours – using a Properla protective product offers many benefits.

Certainly, the improved thermal insulation reduces the heating bill in a pleasing way by creating a thermal-insulated structure. However, being able to protect an older property that was built a few years ago is an added bonus!

Protect your property the easy way, with the help of Properla paint. Learn more about how this revolutionary new product can help weatherproof your property’s exterior today, by calling 0800 1700 636, or by simply clicking the button below!