Mould growth on windows is usually caused by condensation. Mould growth is a warning sign that your insulation, heating, or ventilation needs improving. If you have condensation on your windows, eventually, black mould will start to appear.
The question is, what steps to take, and how to get rid of window mould. We have the answers for you, and we’re here to share them in the following article…
How To Get Rid Of Mould On Windows: Key Causes
As mentioned above, condensation is the main reason mould appears on windows. Condensation occurs when warm and moist air meets a cold surface.
Without proper insulation, that happens all the time. Condensation is attracted to the windows and window frames, because it is usually the coldest part of the room. Over time, condensation will result in mould growth, impaired aesthetics and functionality in the process.
Curbing Condensation: Top Tips And Tricks
You’re probably wondering, how do you get so much warm and moist air in the home. And where does all that condensation come from?. Well, cooking, drying clothes indoors, showering, and even breathing without proper ventilation will cause excess moisture to form.
Here are some tips for how to prevent condensation, and with that, mould as well:
- Put lids on saucepans
- Dry your clothes outside
- Do not use paraffin or bottled gas heaters
- Open the window of your bedroom for 15 minutes every morning
- Ventilate rooms regularly and leave the doors open to allow air to circulate
- When you are showering, open the window, and then close the door of the bathroom if there is no extractor fan. This will prevent moisture from spreading to other rooms
To improve ventilation, and prevent condensation, you should start by repairing any obvious leaks. Windows are usually an underrated part of the home when it comes to insulation and ventilation. But they are just as important; and should be invested in accordingly.
How To Clean Mould On Windows: The Process
We are now getting to the question of how to get rid of window mould long-term. You can always clean the mould. But it is much better to prevent it from reoccurring at a later date.
To clean it, you will need a respiratory mask, vacuum cleaner, rags, white vinegar, rubber gloves, water, empty spray bottle, baking soda, and a bucket. With that in mind, let’s get down to business…
Start by examining the area. Check for mould and identify every point of your windows that are affected. Make sure to examine the glass and frames thoroughly. It is much easier to remove mould at the same time. Check the inner surface of the window frames as well.
- The first step to how to get rid of window mould is dry cleaning. Put on your respiratory mask, and use the vacuum cleaner to remove loose spores. Make sure the window is open when cleaning, so that the particles of mould have an escape route. Go through the glass and frames, covering every section.
- Put on a pair of gloves, and use a cloth dampened with tepid water. Wipe the frames and panes of the windows. The goal here is to remove excess mould. Do not rub hard. Rubbing hard might force the mould spores into the window frame.
- At the end, spray white vinegar onto the windows. Leave it there for few minutes. In the meantime, get baking soda and a clean cloth. Use the cloth to rub away the mould with baking soda. As an abrasive, baking soda will kill the remaining mould on the windows. Dry the surface with a clean cloth at the end.