Go back
Flat Roof & Conservatory Roofs

How to Replace a Flat Roof: Do It Yourself Vs. Enlisting an Expert

how to replace a flat roof do it yourself

Let’s face it, working on a flat roof is far less intimidating than a sloping roof. The risk of misplacing your footing and sliding to a nasty fall is far less likely when dealing with a flat surfaced roof.

The ease, however, does not negate all the risks! If you approach the project with no prior experience in roofing, you’re likely to run into problems.

So, if you’re wondering how to replace a flat roof do it yourself (DIY) style – perhaps it’s best you thought of a safer, less troubling option.

If you’re still keen to crack on in your search on how to replace a flat roof do it yourself approach, we’ve outlined some key considerations before approaching the project below. And then some friendly advice to ignore it all!

How to Replace a Flat Roof Do It Yourself (DIY) Style

The first option is; you can put on your overalls, dust off the old toolbox and attempt to replace the roof yourself.

By taking ownership of the project, you’re responsible for allocating the budget, choosing suitable materials, and enduring the physical labour required; all whilst doing it within a time frame which is convenient for you!

What Type of Roof Do You Want?

You must first decide which kind of flat roof you desire. There are plenty to choose from, so it’s important to first research which is best for you. Next, you’ll have to shop around for the best materials within your budget.

Removing the previous roof can be difficult and you should only use specialist tools such as a scraper. The same goes for decking beneath the roof surface!

If any of the decking has rotted, this must be carefully removed and replaced which can be tricky and may cause damage to the building’s structure.

Tricky Steps To Tackle!

Next, you need to install the synthetic or wooden strips on top of the surface of the wood skeleton. This is your new visible outer layer of your roof. This helps the roof become watertight and will protect the structure of your building.

You can then apply a base sheet and any flashes around air vents, if needed to add further protection.

These are all very tricky yet incredibly important steps. A lot of training and experience goes into getting this job right every single time. So when wondering how to replace a flat roof do it yourself vs enlisting an expert, you have to ask yourself if you have the skills and knowledge required!

how to replace a flat roof do it yourself

While it may be easy to tear off and remove the older roof, adding the new material is a much more specialist task. By hiring a trusted, industry professional, you can rest assured that the project is in safe hands

Sorting Cowboys From Credible Contractors!

If the above sounds confusing (and it probably does), you might want to enlist the help of a professional.

When seeking a professional trades-person, always be sure to check relevant online reviews on websites such as Trust Pilot for ratings and comments. These can help steer you in the right direction – and away from cowboy builders and con men!

Another good avenue to consider is speaking with friends, family and colleagues; see if they’ve had a similar project undertaken for any of their properties, and ask for their thoughts on the overall service they received.

Advantages and Disadvantages

The main advantage of undertaking a roof replacement yourself is that the initial costs are usually lower, as there are no labour costs to consider other than your time. Removing the old roof is a fairly simple task, in comparison to installing the new one anyway!

There is also a sense of independence and a sense of pride, knowing you’re able to work autonomously to alleviate a problem with your home.

The issue is, pride can quickly be diminished and turned into embarrassment if you attempt something that goes wrong. Just one poor decision can result in the cost of the project increasing, or you missing your intended deadline.

If materials fail to meet the specifications required for the build, or you make a mistake where materials must be replaced, it is you who must front the additional costs.

It’s the Replacement Process That’s Tricky!

While it may be easy to tear off and remove the older roof, adding the new material is a much more specialist task. By hiring a trusted, industry professional, you can rest assured that the project is in safe hands.

You’ll avoid incurring any nasty, additional costs if things go wrong, as this will be the fault of the company, and it will be up to them to fix the problem. They should also front the money for a resolution.

You can also be assured your home is in good hands, protecting the value of your home – confident all planning permission and construction laws and regulations are also being adhered to.

Thinking about replacing your roof, but overwhelmed by the options on offer? Our roofing experts are here to guide you every step of the way-call 0800 1700 636, or simply click the button below to talk to the team today!