Go back
Protective Coatings

Installing Insulation in Walls After Construction

installing insulation in walls after construction

Why might you want to add insulation in an existing home? Well, it could improve your comfort levels and save you money on your energy bills, for a start.

By adding more insulation, you can normally reduce your energy bills, unless you already live in a property which was specifically constructed to be energy efficient. Otherwise, installing insulation in walls after construction needn’t be a bother!

Older homes often have less insulation than new-build homes, but it can still be cost-effective in the long term to add insulation to a new property. You could see substantial savings almost immediately when installing insulation in walls after construction.

In order to work out whether or not it is worth adding insulation to your home, you will first need to assess how much insulation is already present in your property, and where it is located.

You can do this by organising an energy assessment (also known as an energy audit) with a qualified auditor. This will normally include a thorough insulation check, and it can also be useful to identify any parts of your home which need to be air sealed to improve energy efficiency.

With the aforementioned in mind, here’s the lowdown on installing insulation in walls after construction…

The Difficulty of Installing Insulation in Walls After Construction

Installing insulation in walls after construction can prove challenging at times, but it’s certainly not impossible.

That’s because accessing cavities can be tricky, and so installing in-wall or cavity walls can be decidedly difficult. Once a house has been constructed, it can’t be dismantled in order to add insulation.

In some cases, particularly in older properties, solid walls are present – in fact, one in four homes in the UK is of solid wall construction.

When insulating the outside of a solid wall, there is also the concern about changing the exterior appearance of your property, for which you are likely to need planning permission. If you own a listed building or live in a conservation area then there is a good chance you may not get the permission you need.

But insulating even a solid wall home can save you a significant amount of money in energy bills, so it’s well worth it.

So how do you get around the issues with installing insulation in walls after construction?

Successfully Installing Insulation in Walls After Construction

External masonry cream is one of the best ways of installing insulation in walls after construction. It can be used during the construction of a home or afterwards for the same great results. It is a far more feasible option for pre-built homes than many other types of insulation.

This type of product is also ideal for homes with solid wall construction. If you own an older property, then you may want to improve your level of comfort and reduce the amount you are spending on energy bills, without affecting the façade of your home.

When it comes to listed buildings or those in conservation areas, you may not receive permission to make alterations to your home’s exterior.

But there are products available on the market which can effectively weatherproof your home, protecting it from the elements and helping to trap heat inside, without changing the exterior of your building. This can result in significant savings of hundreds of pounds on your yearly energy bills.

There are many products available on the market to choose from, but we trust just one for the very best results!

Imagine external insulation like a waterproof jacket wrapping the building – it repels moisture from the brickwork. This minimises cold bridging in the majority of solid walls and will boost the thermal efficiency of your home

Cavity Walls VS Solid Walls

If your home was built prior to the 1920s, then there is a good chance that you have solid walls rather than cavity walls; in fact, this applies to one in four homes in the UK. External wall insulation is a great choice if you have solid walls.

There are a number of disadvantages to using internal insulation if your home is of a solid wall construction. Internal insulation can be much more complicated to install, not to mention costly too. It can also take up valuable floor space in your home.

Home Logic’s Easy and Efficient Process

Our efficient 10-step process is applied to every exterior insulation job. It’s an all-inclusive service which ends with us tidying up after ourselves to leave your property as we found it (but with better insulation).

We always begin with a free site survey and inspection of your home. This helps us to identify any problems. We then power wash your external walls to remove accumulated debris and dirt.

Our team of professionals carry out preparation techniques to prime your walls for application of the product. This can include crack repair, bagging (applying an SBR/UniBond Bag Coat to improve adhesive qualities), rendering and algae treatment.

Then we use paper and masking tape to cover areas that don’t need to be covered with the insulation material, as well as using dust sheets to protect your home. A coat of primer is applied before we install your exterior wall insulation.

We’re professionals, so you can trust us to clean up any mess we make – this is the final step in our process. We’ll remove masking tape and protective equipment, aiming to minimise the disruption to your daily life during the process.

installing insulation in walls after construction

Our innovative Home Logic Wall Insulation provides a water-resistant covering for masonry that can penetrate up to 17mm. Completely transparent, it won’t affect the exterior appearance of your property and is painted or sprayed on by our team of experts using specialist equipment

Is External Wall Insulation Any Good?

We provide a fantastic inclusive service and have a great deal of confidence in our insulation management services and the external wall insulation product we provide. It’s fair to say that your end results will only be as good as the quality of the materials used and the service providers chosen.

We work from the roof down to maximise your home’s energy efficiency and we have many years of experience working in the industry with a wide range of different sizes and styles of property.

It is proven to reduce water absorption by over 95% for over 20 years – that’s pretty impressive as we’re sure you’ll agree!

External Wall Insulation – A Wise Investment

So why is insulating your home’s exterior such a wise investment? Well, the main benefit is that you can reduce heat loss through walls.

Because wet surfaces transfer heat more effectively than dry surfaces, a water-repellent barrier such as external insulation helps to keep your brickwork dry and can reduce heat transfer.

Dry brickwork means less heat is lost through the walls which, in turn, means you will need to use your central heating less, and you’ll save money on your energy bills throughout the year.

So as you can see, installing insulation in walls after construction couldn’t be easier!

More Advantages of External Wall Insulation

This isn’t the only advantage of external wall insulation though – look at all of these additional benefits it offers:

  • Refresh your property’s facade
  • Provide protection from the elements
  • Reduce noise from outside and improve inside acoustics
  • Make your home more energy efficient and comfortable
  • Reduce the risk of condensation and mould

installing insulation in walls after construction

Our expert advisors are on hand during working hours to offer no-obligation advice and answer any questions that you have about the insulation process

Home Logic External Wall Insulation

Home Logic Wall Insulation keeps masonry dry, and repels water. This is by far the most effective method of installing insulation in walls after construction.

Because wet surfaces transfer heat faster than dry surfaces, this makes your home more energy efficient, improving thermal resistance and protecting your home from frost damage in cold weather.

The material repels debris and dirt, which is simply washed away by the rain, leaving the façade of your home clean.

Our protective coating is also available in a wide range of textures and colours, so you can choose the one which perfectly complements your home’s exterior. The cream is mould-resistant and helps to reduce microbial growth.

Installing Insulation in Walls After Construction with Home Logic

You can get in touch with us at any time to get more information about external wall insulation, simply to book your free survey at a time which suits your schedule.

Our expert advisors are on hand during working hours to offer no-obligation advice and answer any questions that you have about the insulation process. You can call us on 0800 1700 636. If you’d prefer to get in touch with us outside business hours then you can send us an email instead at survey@homelogic.co.uk.

We offer a free site survey so that you can see if your home could benefit from external wall insulation.

We can arrange this at a time to suit you so that you can be present throughout, and there is no obligation to go ahead and use our services after the survey – although we hope you’ll jump at the chance to make your home more energy efficient and save money on your energy bills!

What are you waiting for? Start installing insulation in walls after construction today by calling 0800 1700 636, or clicking the button below!