HOME LOGIC LIVINGYour inspiration
- Protective Coatings
- Driveways & Resin Surfacing
- Windows, Doors & Conservatories
- Boilers & Smart Home Products
- Replacement Conservatory & Flat Roofs
- Spray Foam Insulation
- Online EstimatorBEST Offers TODAY!
- HOMEWORLD Shop OnlineGet In TouchGo backProtective Coatings
Mortar Ratio For Brick Masonry: Focus On External FacadesBy admin
Thursday, 19 September 2019
When constructing a new wall, or repainting an existing wall, the correct mortar ratio for brick masonry is extremely important. If you don’t get the mixture correct, you could be in for some serious problems down the line.
Mortar is used in construction to stick masonry units together, by filling in the gaps between bricks, stones, or concrete blocks. Primarily, this is to seal the masonry together, but can also be used for decorative purposes.
The importance of using the right mortar ratio for brick masonry lies in the strength of the overall finish of the wall. The correct mortar ratio for brick masonry will create a strong wall, be it load bearing or non-load bearing. The opposite is a wall that will quickly deteriorate, if it even bonded in the first instance.
What Types of Mortar for Brick Masonry Are There?
There are multiple different types of mortar mixes that are used for different purposes during construction. These are known as mortar type M, N, O, K, and S, and all have a different mortar ratio for brick masonry.
Some require more sand, or cement, whilst others require the inclusion of lime, which helps the wall to breathe. This is essential for certain types of wall, and for preventing moisture damage from occurring.
Some types of mortar are preferred for structural wall building, whilst others are designed primarily for repointing. This is where older mortar is replaced with new mortar to maintain the structural support of a building.
As mortar is designed to be weaker than the bricks used in masonry to allow for flexibility, repointing is a common maintenance job.
Ensuring the Correct Mortar Ratio
To ensure that you are using the correct mortar ratio for brick masonry, in your specific project, it’s essential to know which mortar mix you require.
It can be very beneficial to seek the assistance of a trusted expert, before moving on with your project, as well as fully understanding the procedure for mixing and applying mortar.
For general purpose masonry, mortar type N is commonly used. With a medium strength, the mixture normally consists of a mortar ratio for brick masonry of 6 parts of sand, 1 part of lime, and 1 part of cement.
The mix for mortar type N varies significantly from the much stronger, but more limited, M type mortar. This has a mix of 12 parts of sand, ½ part of lime, and 1 part of cement.
For masonry construction or repainting projects, it is the perfect time to invest in a new wall coating. Helping you to not only increase the protection of your property, but also your comfort levels inside your home!
The Best Brick Masonry Protection
Once your mortar mix has set and is secure, the next step, and a very important one, is further protecting the exterior of the wall from damage. This includes damage from the weather, but also the build-up of dirt and grime that can detract from the finish of your wall.
One of the most popular and effective ways to do this is through the use of a professional wall coating. A wall coating is a substantial leap above your standard everyday masonry paint in terms of the vast range of benefits that it offers.
By coating your walls in a professional standard wall coating, such as a masonry cream or water repellent, you’re ensuring that your walls retain their breathability, without being exposed to weather damage, such as the damage caused by frost or wind driven rain.
Investing in the Future of Your Home
When completing each home improvement or construction project, it can really pay dividence to examine what further benefits that project can bring to your home.
For masonry construction or repainting projects, it is the perfect time to invest in a new wall coating. Helping you to not only increase the protection of your property, but also your comfort levels inside your home.
For more information about the installation of professional wall coatings, our experienced team at Home Logic are always on hand to help.
We understand just how important the structural security of the walls of a property is, and have been helping homeowners for many years to increase the protection of their homes.
Just as it is essential to get the right ratio for brick masonry, it is also essential to then protect your walls going forwards. Take the first step to ensuring premium property protection today, by calling 0800 1700 636, or, alternatively, by simply clicking the button below!Related Home Logic Living Articles
FULL RANGE OF SERVICES:OUR OFFICES:
- Benefits of External Wall Insulation
- Cost of External House Insulation
- Waterproofing Exterior Walls Products: The Essential Guide
- DIY External Wall Insulation – Everything You Need to Know
- Do You Know the External Wall Insulation Requirements in the UK?
- Do Brick Walls Need Insulation?
- Insulating An Old House From The Outside
- Different Types Of Rendering: The Definitive Guide
Home Logic’s continued commitment to you is that we only use the highest quality products, installed to the highest standards.© Home Logic UK Ltd. 2018. All rights reserved. Registered Office: c/o HJS Accountants, 12-14 Carlton Place, Southampton SO15 2EA | Company Registration No: 09125321 | VAT No: 193899534 | Home Logic ® is a registered trademark of Home Logic UK Ltd (UK00003267772) | Home Logic UK Ltd is registered in England and Wales. Home Logic UK Ltd is authorised and regulated by the Financial Conduct Authority. We are a credit broker and not a lender. We offer credit facilities from more than one lender.
Update Your Preferences