Go back
Protective Coatings

Paint Defects And Solutions: Protect Your Masonry For Less

paint defects and solutions

You’ve finally finished repainting your home, the finish looks great, and the colour is spectacular, but then you start noticing defects in the paint appearing over time.

The situation is one that many homeowners have been in before, where their once perfect finish, is now anything but spectacular.

There are seemingly endless rules for painting your home, from which paint is best, to how to prepare the surface in advance.

When you couple in the additional problems with painting the exterior of a house, where the weather plays a big factor, there is a lot that can go wrong; even if you feel like you have everything covered.

To help you stay on top of the most common causes of paint defects and solutions, we have put together a list of the top 5 paint defects and solutions for exterior painting – so you can avoid those disheartening flaws in your paintwork, and prevent them before they happen….

paint defects and solutions

An essential part of our paint defects and solutions list if you are striving for a smooth finish to your external walls, is the avoidance of contaminants

Problem 1. Blistering and Bubbling Paint

Blistering and bubbling paint is never a good thing to see; especially when it appears mid-painting, and ruins all your hard work. Sometimes the defects are small, but in more serious cases, the majority of your paintwork will need repainting.

There are multiple causes of blistered or bubbling paint, including:

• Damp walls
• Dirty walls
• Hot temperatures
• Using the wrong kind of paint

The Solution

The main solution to blistered and bubbling paint is to properly prepare your walls in advance. This requires cleaning the exterior walls, and allowing them to dry completely before the paint is applied.

It is also essential to paint on the right day, when the temperature isn’t too high, and there isn’t a chance of rain ruining the paintwork.

Problem 2. Contaminated Paint

An essential part of our paint defects and solutions list if you are striving for a smooth finish to your external walls, is the avoidance of contaminants.

Loose render, dirt, and algae mixing with your paint, can not only prevent you from getting the perfect smooth look, but also create places for more dirt and grime to gather.

The Solution

Much like with blistering and bubbling paint, preparation is key for avoiding materials on your wall from contaminating your paint.

All render should be repaired before painting, defects in the wall fixed, and the surface should be properly cleaned and prepared.

paint defects and solutions

The best way to avoid mildew on paintwork, is to use a wall coating that stops it from forming, and prepare the surface properly in advance

Problem 3. Running Paint

During painting, there are few things more frustrating than seeing streaks and runs in your paintwork.

This is especially the case if you don’t notice them until your paint has started to dry, and there is little you can do about the marks without removing the paint in that area, and starting again.

The Solution

Like many defects in our paint defects and solutions list, there are multiple reasons why paint may run, which means there are plenty of solutions. These include:

• Making sure the paint is applied carefully and sparingly
• The temperature isn’t too low, or humidity too high
• Using an exterior wall primer beforehand

Problem 4. Mildew on Paint

Mildew can very quickly detract from the look of your new paintwork, both when the paint was applied over mildew, and when it has appeared on top of the fresh paint.

The fungus can turn even the most beautiful of finishes into a green or grey blotchy mess, and is commonly the result of moisture and ventilation issues.

The Solution

The best way to avoid mildew on paintwork, is to use a wall coating that stops it from forming, and prepare the surface properly in advance.

Cleaning all mildew off a wall should always be done before repainting.

paint defects and solutions

With a vast range of colours to choose from, the benefits of hydrophobic breathable technology, and a finished surface that will clean itself, all the problems on our top 5 paint defects and solutions list, will be a thing of the past

Problem 5. Discoloured Paint

Whether from weather damage, such as wind driven rain, or through use of a poor-quality paint, discolouration is a recurring problem for many homeowners.

As a result, a home often needs to be repainted every couple of years-a laborious and time-consuming process in itself.

The Solution

As with most additions to our top paint defects and solutions list, discolouration can be prevented by using the right paint initially.

The top wall coatings available come with prevention against discoloration, including problems with dirt, salt, and moss.

Wall Coatings: The Ultimate Solution to Common Paint Defects

One of the best solutions to paint defects is to combine a professional wall coating service, with a specialist wall coating that is designed to prevent many of the common painting problems.

Here at Home Logic, we only use the best wall coatings on the market, those designed to resist dirt, create a perfect finish, and eliminate moisture problem.

You can count on us to ensure that the finish will be nothing less than spectacular, but also that the product we use goes above and beyond standard masonry paint.

With a vast range of colours to choose from, the benefits of hydrophobic breathable technology, and a finished surface that will clean itself, all the problems on our top 5 paint defects and solutions list, will be a thing of the past.

For photo gallery and Before & After shots, watch the video below.