HOME LOGIC LIVINGYour inspiration
- Protective Coatings
- Driveways & Resin Surfacing
- Windows, Doors & Conservatories
- Boilers & Smart Home Products
- Replacement Conservatory & Flat Roofs
- Spray Foam Insulation
- Online EstimatorBEST Offers TODAY!
- HOMEWORLD Shop OnlineGet In TouchGo backSpray Foam Insulation
Spray Foam Vs Batt Insulation SoundproofingBy admin
Tuesday, 3 September 2019
Are you considering having some form of soundproofing material installed for your home or office? If you have been looking at what’s available, you will have noticed that there are several options out there.
Some are clearly better than others and, with some being quite similar to each other, it can be difficult to decide which you should choose.
Two of the most popular options are spray foam and batt insulation. This leads to the question of which comes out on top when considering spray foam Vs batt insulation soundproofing. Intrigued? All will be revealed in the following article…
Ease of Installing Spray Foam Vs Batt Insulation Soundproofing
Quite often, an ineffective soundproofing insulation is not down to the material that has been used, but the way that it has been installed. Gaps in the installation allow for sound, and heat, to pass through.
Even if the rest of the installation is carried out perfectly, just one weak link is enough to affect its performance considerably. With this in mind, it helps to look at how each is applied, and how such weak links can be prevented. Let’s kick off the comparisons between spray foam vs batt insulation soundproofing…
Batt Insulation: An Overview
Batt insulation is basically large slabs of insulation material – most commonly fibreglass. The batts are fairly straightforward to install most of the time, and it doesn’t take an experienced expert to do a decent job. Many walls and ceilings are flat surfaces, making attaching batts of insulation quite easy.
Problems arise, however, when the wall or ceiling it is being applied to is of an irregular shape. If you find yourself needing to apply insulation to a wall or surface that involves corners and protrusions, then things can become difficult.
Batts will need to be cut to shape, and fitted as snugly as possible. This can be challenging even for experienced installation experts.
Spray Foam: An Overview
Spray foam is just as it sounds – a foam that is sprayed onto surfaces. This is done using an applicator that makes the job easy.
One of the main advantages of using spray foam is the way that it expands once it has been applied. It actually expands up to 100 times its original size, filling in any gaps as it goes.
This means that instead of taking the time to make sure everything fits snugly; the foam does the work instead. Even the most awkward of crevices and protrusions are dealt with easily. Simply aim the applicator, spray the foam, and the job is done.
Not only does this make the job considerably easier, it also helps to ensure that no gaps are left. With no gaps, your home or office is insulated as well as it can be, helping to keep noise levels, and heat loss, to a minimum.
If you are weighing up the choice between spray foam vs batt insulation soundproofing, it is easy to see how spray foam is often the best choice. Not only is it more effective as a sound insulating material, it is also considerably easier to apply!
Future Maintenance: Key Considerations
At some point in the future, there is a chance that you will need to carry out repairs and maintenance on your home. This will often mean accessing the cavities in your home, and/or the loft.
This could also mean the need to temporarily remove any insulation that you have there, so that you can gain access to what you need to repair.
With batting, this can be tricky. There may be a need to remove a whole batt just to gain access to even a small area. With spray foam, however, this is much easier.
It is very easy to cut into spray foam to remove a part of it, and gain access to what you need access to. This can be done in just a few moments, and with straight forward tools.
Re-Patching Things Up: Top Tips
Once you’ve made your repair, you will then need to replace the insulation; in some cases, this can be even harder than removing it. Replacing batting can mean cutting it to shape in awkward areas just as when it was first installed.
It also means having to handle the material once more, which due to health risks, isn’t advisable.
With spray foam, however, all that you need is a quick spray of fresh foam in the cavity, and the new foam will fill the gap in just a matter of moments. Again, as the foam expands, it fills in all gaps, helping to ensure that your insulation remains as effective as the day it was first installed.
If you are weighing up the choice between spray foam vs batt insulation soundproofing, it is easy to see how spray foam is often the best choice. Not only is it more effective as a sound insulating material, it is also considerably easier to apply.
While it may take days, or even longer, to install batting, spray foam can be done in just a few hours, even for larger jobs. Learn more about how this multi-purpose material can negate noise niggles for good today, by calling 0800 1700 636, or by simply clicking the button below!Related Home Logic Living ArticlesFULL RANGE OF SERVICES:OUR OFFICES:
Home Logic’s continued commitment to you is that we only use the highest quality products, installed to the highest standards.© Home Logic UK Ltd. 2018. All rights reserved. Registered Office: c/o HJS Accountants, 12-14 Carlton Place, Southampton SO15 2EA | Company Registration No: 09125321 | VAT No: 193899534 | Home Logic ® is a registered trademark of Home Logic UK Ltd (UK00003267772) | Home Logic UK Ltd is registered in England and Wales. Home Logic UK Ltd is authorised and regulated by the Financial Conduct Authority FRN 765342. We are a credit broker and not a lender and have a facility with a panel of lenders | Home Logic is a trading name of Home Logic UK Ltd
Update Your Preferences