HOME LOGIC LIVINGYour inspiration
- Protective Coatings
- Driveways & Resin Surfacing
- Windows, Doors & Conservatories
- Boilers & Smart Home Products
- Replacement Conservatory & Flat Roofs
- Spray Foam Insulation
- Online EstimatorBEST Offers TODAY!
- HOMEWORLD Shop OnlineGet In TouchGo backWindows, Doors & Conservatories
How To Fit A UPVC Door: 6 Crucial Factors To ConsiderBy admin
Thursday, 19 September 2019
Traditional doors of yonder were usually made from wood, and they were sufficient at the job that they needed to do. The arrival of affordable composites and UPVC, however, gave us access to materials far more effective.
Strong enough to be able to provide the security that is required for the home, composites also provide an effective seal and excellent insulting properties. In addition, they are also very easy to keep clean.
Nowadays, UPVC and composite doors are among the most popular option of all – they can be found throughout the nation. This just leads to the question of – how to fit a UPVC door in your home.
With that in mind, here’s 6 crucial factors to consider before pressing ahead with this project…
While you could try fitting the door yourself, remember, the experts have had a great deal of practice and a lot more experience than you!
It often takes the experience of a seasoned pro to ensure a proper fit; one that will remain secure for years into the future. You will also need to have the right equipment. If you’re adamant on DIY – let’s talk about how to fit a UPVC door!
Learning How to Fit a UPVC Door
How to fit a UPVC door 101. If you have not done this before, you will find plenty of guides online that can help. It is advisable to watch a guide first to pick up any hints and tips that will help you to complete the job as quickly as possible.
The first thing that needs to be done is to ensure that your new door is the right size. Make sure that you measure correctly to help avoid any fitting issues.
Before you install your new door, you first need to remove the old one. Before you do this, make sure that you will not be harming the building’s structural integrity in doing so. Remember that you will need to remove the frame as well as the door itself.
Making the New Frame Level
With the old frame removed, you should clear away any old mortar and other debris, along with any of the old sealant. Resting the sill on the brickwork, you will now need to put the frame into place, and make sure that the frame is level.
This can be done with packers and spirit levels, and you should check that the door frame is in the right way, with drainage holes at the bottom of the frame.
Make sure that the frame has not bowed. You can do this by measuring the distance diagonally from one corner to another. It should measure the same in both directions, and you should also use a spirit level to ensure that the frame is plumb.
Composite doors are much more effective and lost lasting than the UPVC alternative. These doors are actually made from a variety of materials. These materials tend to be better suited to their role than UPVC, making for a more secure and more attractive door
Securing Your Frame
With the frame now in place, you will need to secure it. To do this, you will first need to drill a pilot hole through the frame in towards the brickwork.
You will then need to use a masonry drill through the pilot hole you made earlier, and into the brickwork. Use packers to ensure a tight fit, and put the anchor into place.
You can now use the fixing screw to secure the frame into place. There is a chance that you could bow the frame each time you tighten a screw, so you should re-check it every time to ensure that sash will still fit.
With the frame now in place, you are ready to put the door into place. The frame should be secure enough to take the weight of the sash without bowing or dropping. It is necessary to make sure that the door is toed and heeled to ensure that there will be no complications with it in the future.
Disadvantages of UPVC Doors
While UPVC doors do make for an affordable and sturdy solution, they are not without their disadvantages. Constantly exposed to sunlight and other weather conditions, the UPVC can become brittle over time. This can lead to cracking, posing a potential security risk in the process.
Their appearance can also become less attractive over time. Even when new, UPVC doors will often not match with the rest of the home, causing them to be an eyesore.
Choose Composite – Comprende?
Composite doors are much more effective and lost lasting than the UPVC alternative. These doors are actually made from a variety of materials. These materials tend to be better suited to their role than UPVC, making for a more secure and more attractive door.
Plastics and metals will help to make for a door that is very sturdy, while wood and other materials will help to add to the aesthetic appeal. Composite doors can be found in a range of styles using a range of materials, so you are likely to find something that will complement your home perfectly.
Fitting a new front door may seem like a D.I.Y jobs, but unless you’re a handyman by trade, it’s better to call in the experts. Let our team assist you with your double glazing endeavours today, by simply calling 0800 1700 636, or, alternatively, by clicking the button below!Related Home Logic Living Articles
FULL RANGE OF SERVICES:OUR OFFICES:
- Pros And Cons Of Thermotec Conservatory Roof Panels
- Bifold Door Not Closing? Here's What To Do...
- HOW TO: Choose Aluminium Windows Norwich Contractors
- Double Glazing Salisbury Suppliers: What Do They Offer?
- Why Do My House Windows Fog Up?
- How to Insulate Windows: Your Go-To Guide
- Double Glazing Sheffield And Stocksbridge Services
- How To Choose Double Glazing Coventry Contractors
Home Logic’s continued commitment to you is that we only use the highest quality products, installed to the highest standards.© Home Logic UK Ltd. 2018. All rights reserved. Registered Office: c/o HJS Accountants, 12-14 Carlton Place, Southampton SO15 2EA | Company Registration No: 09125321 | VAT No: 193899534 | Home Logic ® is a registered trademark of Home Logic UK Ltd (UK00003267772) | Home Logic UK Ltd is registered in England and Wales. Home Logic UK Ltd is authorised and regulated by the Financial Conduct Authority FRN 765342. We are a credit broker and not a lender and have a facility with a panel of lenders | Home Logic is a trading name of Home Logic UK Ltd
Update Your Preferences