Go back
Protective Coatings

Water Penetration Through Brick Walls: How To Fix It

different-types-of-rendering

Are you dealing with the problem of water penetration through brick walls? Are you wondering where to turn to eliminate this problem for good? Do you have rising damp coming inside the home?

Many homes throughout the United Kingdom deal with damp problems on a daily basis. This is a wet country which enjoys an abundance of rain throughout the year, but this isn’t good if your brick walls aren’t protected to reduce the risk of water penetration. What have you done to eliminate this risk?

The most effective method is to treat your brick walls during the warm Summer months, so that it has a good barrier against water penetration through brick walls against the onslaught of the elements.

By protecting your property’s brickwork, you can rest safe in the knowledge that your walls remain dry and moisture-free. Here’s a few other pointers to help you weatherproof your home for Winter…

Water Penetration Through Brick Walls

On average throughout the United Kingdom, there are approximately one hundred and thirty-three days of rain or snow, which is 33.7 inches or 885 millimetres.

That is a lot of rain that is taking place somewhere in the country at some point. Ultimately, your location will determine if you get the majority of the rain, or only a few days here or there.

As you can imagine with this amount of moisture, it’s no surprise that your home is at risk of water penetration through brick walls. Finding a good quality prevention method is what you need to eliminate this risk, keep your home dry and make your internal living conditions more pleasant and enjoyable.

Home Logic Wall Insulation: A Solution You Can Trust

Home Logic Wall Insulation is just what you need to provide your brick walls with long-lasting protection. This product offers a host of benefits, with the main advantage being that it penetrates 17mm into the brickwork, offering an invisible barrier against water and moisture.

This superb product can reduce water absorption by 95%, and comes with a twenty-year guarantee, for additional peace of mind.

So what can this product do for your home? For starters, it will improve your thermal efficiency, ensuring comfortable conditions inside. You will find it maintains your original masonry finish, and in addition to this, it’s superbly self-cleaning as well.

You don’t want to put your insulation on damaged walls. Use a professional company to do this work for you, so that you know it has been completed to the very highest of standards!

Eliminate Water Penetration Through Brick Walls: The Process

Whether you are already struggling with water penetration through brick walls or you want to reduce the risk of this even happening to you again; you will want to ensure the following steps are followed.

This will ensure you can get the finished product you need to protect your home against inclement weather!

Inspection

To eliminate water penetration, you are going to want to do a thorough inspection of the outside of your property. Check all the bricks and mortar, looking for any cracks or damage.

This will help you identify where water penetration may be taking place, and also ensures that you know where to repair, before using Home Logic Wall Insulation.

Power Wash

The brickwork should be washed at a very high pressure, using a high pressure washer.

A power washer should be used to remove any dirt and dust on the walls, giving you a clean wall to work with.

Algae Treatment

Because the UK remains damp most of the year, it’s advisable to put a good algae treatment on the brick walls to reduce the risk of algae.

This will also provide a well-prepared exterior wall, before you add the exterior wall insulation product itself.

Crack Repair

The next step of the process is to go around where you saw cracks or mortar damage and make repairs.

You don’t want to put your insulation on damaged walls. Use a professional company to do this work for you, so that you know it has been completed to the very highest of standards.

brick-restoration-products_0.jpg

The final step is to apply the Home Logic Wall Insulation to your walls. This must be done evenly and ensure that you cover all areas-and gain long-term protection throughout evry month of the year!

Bagging

Before you can eliminate water penetration through brick walls, you will want to bag the area.

This means you stabilise the unpainted surface, to ensure it is ready for the insulation application.

Covering

Of course you don’t want the entire property covered in insulation, so the next step is imperative to ensure accurate application.

You will want to cover all doors, windows, gutters and drains before you start.

Prime Coat

The second last step to this process to reduce the risk of water penetration through brick walls, is to prime the walls ready for the application.

Despite being a simple step, it is one of the most important ones in the process; the success of the application depends on it.

Application

The final step is to apply the Home Logic Wall Insulation to your walls. This must be done evenly and ensure that you cover all areas.

Don’t worry that it exhibits a creamy appearance; as it soaks into the brickwork it becomes completely invisible

Ready to take the next step? Talk to our team of exterior insulation experts today by calling 0800 1700 636, or, alternatively, by simply clicking the button below!

For protective wall coatings details & how to order, click on the button below to weatherproof your home today!